stainless steel 316L gas springs

Stainless Steel A4 316L Gas Springs

High corrosion resistant gas spring

An extensive range of sizes and forces

Gas springs are commonly referred to by their size. Typically, the three common sizes for stainless steel gas springs are 6-15, 8-18, 10-23 and 14-28, although other sizes are available. The sizes directly relate to the diameter of the rod and the tube, for example an 8-18 will have a rod diameter of 8mm and a tube diameter of 18mm.

Stainless Steel A4 316L Gas Spring

 Size Range

Range of Stroke Lengths (in 5mm increments)

Range of Tube Lengths(in 1mm increments)

Force Range (in 10 Newton increments)

Thread Type (M)

6-15

40-200

75-230

50-400 (11-90lbs)

M5 x 0.8

8-18

40-300

85-345

100-650 (22-146lbs)

M6 x 1.0

10-23

40-400

85-445

150-1200 (34-269lbs)

M8 x 1.25

14-28

40-500

95-555

200-2500 (45-560lbs)

M10 x 1.5

 

For Vari-Lift versions add 5mm for the valve when calculating the extended length. The force is set to the maximum as standard but can be pre-set lower as required

If you have any questions about specifying 316L gas springs or end fittings ?Contact us!

Stainless Steel


The A4 316L Stainless Steel gas spring provides an increased corrosion‐resistance. A4 Stainless steel 316L gas springs can be used in chloride environments, offshore installations and chemical plants.

These A4 SS gas springs are made of 316L stainless steel and were subjected to more than 1,000 hours of salt spray testing. They are manufactured with a chrome rod surface finish specially prepared for increased hardness and protection against high levels of corrosion. They are ideal for use in harsh environments such as boat cabinets, doors, hatches, as well as for applications requiring a high level of cleanliness, in the food, pharmaceutical and medical fields. industry.

Our stainless steel springs and steel bars are available in a wide range of sizes. Some of our shock absorbers and gas bars are also available in stainless steel.

You have all the advantages of a standard gas spring, but you also benefit from a high corrosion resistance that allows these gas springs to be used in harsh environments where the standard gas spring would be more likely to suffer from corrosion problems.


Benefits

  • High corrosion resistance especially in the marine environment
  • 1000 hours salt spray tested
  • 316L stainless steel rod & tube
  • Custom designed to your application
  • Top quality Stainless Steel Rods

Stainless Steel Gas Springs

Stainless Steel Gas Springs